|
#1
|
|||
|
|||
2.5 Liter 4 Cylinder Question
I installed a re-built 2.5 4 cylinder motor in my 95 Dakota several years ago. The rebuilt motor is originally out of a 91 Dakota. When I installed it I used the 95 valve cover which is a cast aluminum unit. The 91 model used a sheet metal "curtain" over the cam and rocker arms. I couldn't fit it in the 95 valve cover and there was no other "curtain" with the 95. To make a short story long, the engine is using a lot of oil and I think it is being sucked into the PCV system. There are no leaks. My question is if there was a "curtain" used with the 95 engine or was there another way to keep the oil from being drawn into the engine?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2.5 liter conversion to 4.0 liter | guxpert | Jeep Chat (Wrangler, Cherokee, etc...) | 1 | 08-27-2006 11:54 AM |
Help! 4.7 Liter Cylinder Heads Needed! | partsrecycler | Trucks - Parts Wanted | 0 | 03-25-2003 07:18 PM |
Help! 4.7 Liter Cylinder Heads Needed! | partsrecycler | Trucks - Vehicles Wanted | 0 | 03-25-2003 07:14 PM |
HELP! 4.7 Liter Cylinder Heads Needed! | partsrecycler | Jeeps - Parts Wanted | 0 | 03-25-2003 07:12 PM |
3.9 liter perf question | emt_156 | Dakota Truck Forum | 13 | 07-02-2002 02:00 AM |